Artigos
URI Permanente para esta coleção
Navegar
Submissões Recentes
Agora exibindo 1 - 5 de 98
- ArtigoImpacto nas Propriedades Mecânicas e Tensões Residuais do Material ASTM A572 Grau 50 Soldado por Arco Submerso com Alívio de Tensões Térmico(2019-10-29) VIEIRA, FERNANDO DIAS; AL-RUBAIE, KASSIM SHAMIL FADHIL; PRETI, ORLANDO; RICHTER, RINGO OTTMAR; Sergio DelijaicovO aço ASTM A572 Grau 50 é utilizado na fabricação de conjuntos soldados para aerogeradores, por este motivo, a realização de alívio de tensões é de grande importância para correção dos impactos causados pelos processos de soldagem, bem como, o conhecimento das propriedades finais obtidas com a realização deste processo. O objetivo desse estudo é comparar as propriedades mecânicas e tensões residuais (método de furo cego) em amostras de aço ASTM A572 Grau 50, soldadas pelo processo de arco submerso, submetidas ao alívio de tensões na condição térmica (PWHT) e na condição como soldado (SST), seguindo os requisitos normativos da AWS D1.1-2015. Os resultados da condição PWHT referente a dureza, limite de escoamento, resistência a tração e tensões residuais são menores e os valores de alongamento e energia absorvida ao impacto são maiores do que a condição SST. Ambas as condições foram aprovadas no ensaio de dobramento lateral. Os resultados obtidos demonstram a importância do processo de alivio de tensões que minimiza os efeitos indesejados dos processos de soldagem aos componentes.
- ArtigoReview: Effect on physical, mechanical, and wear performance of ZrB -based composites processed with or without additives(2020-06-03) VERMA, VIKAS; CHEVERIKIN, VLADIMIR; Ronaldo Câmara CozzaBecause of unique combination of properties, ultra high temperature ceramics (UHTCs) are considered the most suitable material for applications in extreme en-vironments as in hypersonic flights, atmospheric reentry, and rocket propulsion sys-tem. Processing of UHTCs especially ZrB2-based ceramic composites with additives offer advantages in terms of simple processing methodology and excellent proper-ties. Processing route highly controls the ceramic properties. Present review share out systematically and explain the processing strategies of ZrB2-based ceramic com-posites––conventional, hot press or spark plasma sintering and their effect on micro-structure features, physical, and mechanical properties and tribological performance. Present review suggests that it is possible to process full dense ZrB2–SiC ceramic composite with ultrafine or nano size particles via fast sintering technique like spark plasma sintering and gives better mechanical and wear resistant properties.
- ArtigoInfluência da temperatura de resfriamento sobre a variação mássica e resistência mecânica de ABS injetado(2020-06-22) SILVA, FABIANO APARECIDO; Ronaldo Câmara CozzaPeças de ABS injetadas e submetidas a diferentes temperaturas de resfriamento podem apresentar variações em sua massa e diferentes níveis de resistência mecânica. O objetivo deste trabalho é estudar a influência da temperatura de resfriamento sobre a variação mássica e resistência mecânica de peças produzidas em ABS por injeção. Com isso, inicialmente, corpos- -de-prova em forma de engrenagem foram produzidos sob diferentes condições de resfriamento. Em seguida, a variação mássica dos corpos-de-prova foi analisada com o auxílio de uma balança analítica. Para a verificação da resistência mecânica do material estudado, foi projetado e construído um dispositivo mecânico, o qual possibilitou a aplicação de um carregamento ativo entre dois corpos-de-prova. Pelos resultados obtidos, foi possível observar que, com a diminuição da temperatura de resfriamento, houve um aumento de massa e resistência mecânica das peças injetadas.
- ArtigoTribological Behavior Analysis of the ISO 5832-1 Austenitic Stainless-Steel Treated by Optical Fiber Laser Used for Biomedical Applications(2019-11-15) MACEDO, MARCELO DE MATOS; Ronaldo Câmara CozzaThe present work analyzed the influence of an optical fiber laser surface treatment process on the tribological behavior of the ISO 5832-1 austenitic stainless-steel, basing on the wear volume and friction coefficient. Specimen of this biomaterial were treated by alternating the laser frequency, in order to find out a condition that improves its tribological resistance. Ball-cratering micro-abrasive wear tests were carried out with a test ball of AISI 316L stainless-steel, used as counter-body, and an abrasive slurry prepared with abrasive particles of black silicon carbide (SiC) and distilled water. The micro-abrasive wear tests results indicated that: i) the hardness of the ISO 5832-1 austenitic stainless-steel increased as a function of the laser frequency, decreasing, consequently, the wear volume, as predicted by Archard's Law; ii) the friction coefficient did not present a proportional behavior with the increase of the optical fiber laser frequency; iii) the best condition to improve the wear resistance of the ISO 5832-1 austenitic stainless-steel was obtained adopting an optical fiber laser frequency of 350 kHz, being reported the lower wear volume.
- ArtigoStudy of the Influence of the Micro-Abrasive Wear Modes on the Behaviors of the Volume of Wear and Coefficient of Friction of Thin Films Submitted to Micro-Abrasive Wear(2019-04-13) WILCKEN, JORGE THIAGO DE SOUSA; MACEDO, MARCELO DE MATOS; SCHON, CLÁUDIO GERALDO; Ronaldo Câmara CozzaThe purpose of this work is to study the influence of the micro-abrasive wear modes on the behaviors of the volume of wear (V) and on the coefficient of friction (µ) of thin films. Experiments were conducted with thin films of TiN, TiAlN, TiN/TiAlN, TiHfC, ZrN and TiZrN, using a ball of AISI 52100 steel and abrasive slurries prepared with black silicon carbide (SiC) particles and glycerine. The results show that the abrasive slurry concentration affected the abrasive wear modes (“grooving abrasion” or “rolling abrasion”) and, consequently, the magnitude of the volume of wear and of the coefficient of friction, as described: i) a low value of abrasive slurry concentration generated “grooving abrasion”, which was relationed to a relatively low volume of wear and high coefficient of friction; ii) a high value of abrasive slurry concentration generated “rolling abrasion”, which was relationed to a relatively high volume of wear and low coefficient of friction.