CAF—a simplified approach to calculate springback in Al 7050 alloys
Nenhuma Miniatura disponível
Citações na Scopus
12
Tipo de produção
Artigo
Data
2017
Autores
Brandao F.M.
Delijaicov S.
Bortolussi R.
Delijaicov S.
Bortolussi R.
Orientador
Periódico
International Journal of Advanced Manufacturing Technology
Título da Revista
ISSN da Revista
Título de Volume
Citação
BRANDÃO, F. M.; DELIJAICOV, Sergio; BORTOLUSSI, Roberto. CAF-a simplified approach to calculate springback in Al 7050 alloys. International Journal, Advanced Manufacturing Technology, v. 88, n. 1, p. 1-12, 2017.
Texto completo (DOI)
Palavras-chave
Resumo
© 2017, Springer-Verlag London.Aeronautical industries have looked for news fabrication processes to reduce the costs and the waste of the material during milling operations. One of these new processes is the creep age forming (CAF). The purpose of this work was based on springback analysis during the forming of single- and double-curved sheets of Al 7050 by the process of CAF. A simplified model based on a Norton power law was used in order to, alongside with a program of finite elements, allow the calculation of springback after the process. The experimental verification was carried out. Beside the springback results, other results were a decrease in the Young’s module of 11.5% in the creep aging temperature, in relation with ambient temperature during the CAF process and the variation of aluminum alloy’s yield stress during the process. The springback effect increased on the basis of aging time and then decreased due to intense aging of the alloy; an ideal time of 8 h is estimated for the Al 7050 alloy to carry out the CAF process. The research is limited to the use of the simplified model and its applicable results to Al 7050 alloys. Al 7050 is aligned with its vast use in the aeronautical industry, and the simplified model’s application may rapidly offer the necessary values of springback for the tooling project.