Synergism between tribological parameters – “micro-abrasive concentration level”, “micro-abrasive particle type”, and “liquid type” of a micro-abrasive slurry composition on the micro-abrasive wear behaviour of Fe-30Al-6Cr (at.%) iron aluminide alloy

Página do item simplificado
dc.contributor.advisorOrcidhttps://orcid.org/0000-0002-4880-4791
dc.contributor.authorDE PAULA, A. F. M.
dc.contributor.authorBORGES, D. F. L.
dc.contributor.authorDA SILVA F. C.
dc.contributor.authorROSSINO, L. S.
dc.contributor.authorMANFRINATO, M. D.
dc.contributor.authorVERMA, V.
dc.contributor.authorLUNA-DOMINGUEZ, J. H.
dc.contributor.authorMAGNABOSCO, R.
dc.contributor.authorSCHON, C. G.
dc.contributor.authorRonaldo Câmara Cozza
dc.date.accessioned2023-05-01T06:02:37Z
dc.date.available2023-05-01T06:02:37Z
dc.date.issued2023-07-15
dc.description.abstract© 2023 Elsevier B.V.Observing the importance of intermetallic materials in mechanical and metallurgical applications, the present work investigates the micro-abrasive wear behaviour in a model–carbide reinforced iron aluminide system. Fe–30Al–6Cr (at.%) iron aluminide alloy with carbon additions “as cast” specimen was tested. Micrographs revealed a continuous network of eutectic chromium carbides at the interdendritic regions of the D03 ordered aluminide matrix. AISI 52100 bearing steel sphere of diameter 25.4 mm (1″) was used for wear tests as counter body. Micro-abrasive slurries were prepared with micro-abrasive particles of black silicon carbide – SiC or alumina – Al2O3, with distilled water or glycerin, in four possible combinations of materials ⇒ “Al2O3 + H2O distilled”, “Al2O3 + glycerin”, “SiC + H2O distilled” and “SiC + glycerin”. Further, keeping the normal force constant and together with different levels of micro-abrasive slurries compositions and sliding distances, a factorial experiment was designed. Result analysis showed that wear volume increased with an increase in micro-abrasive slurry concentration, independently of the type of micro-abrasive particle and liquid. However, the micro-abrasive slurries prepared with SiC and distilled water provided larger wear volumes than the volumes of wear reported under the micro-abrasive slurries formulated with Al2O3 and glycerin. The reason is attributed to the high hardness of SiC particles resulting in high abrasion, whereas the Al2O3 – glycerin slurry lubrication effect restricted high wear. Wear micrographs revealed a change in worn surface morphology from “grooving micro-abrasion” to “rolling micro-abrasion” due to an increase in sliding distance and micro-abrasive slurry concentration.
dc.description.volume524-525
dc.identifier.citationDE PAULA, A. F. M.; BORGES, D. F. L.; DA SILVA F. C.; ROSSINO, L. S.; MANFRINATO, M. D.; VERMA, V.; LUNA-DOMINGUEZ, J. H.; MAGNABOSCO, R.; SCHON, C. G.; COZZA, R. C. Synergism between tribological parameters – “micro-abrasive concentration level”, “micro-abrasive particle type”, and “liquid type” of a micro-abrasive slurry composition on the micro-abrasive wear behaviour of Fe-30Al-6Cr (at.%) iron aluminide alloy. Wear, jun. 2023.
dc.identifier.doi10.1016/j.wear.2023.204867
dc.identifier.issn0043-1648
dc.identifier.urihttps://repositorio.fei.edu.br/handle/FEI/4767
dc.relation.ispartofWear
dc.rightsAcesso Aberto
dc.subject.otherlanguageGrooving abrasion
dc.subject.otherlanguageIntermetallics
dc.subject.otherlanguageIron aluminide alloy
dc.subject.otherlanguageMicro-abrasive wear
dc.subject.otherlanguageMicro-abrasive wear mode transition
dc.subject.otherlanguageRolling abrasion
dc.titleSynergism between tribological parameters – “micro-abrasive concentration level”, “micro-abrasive particle type”, and “liquid type” of a micro-abrasive slurry composition on the micro-abrasive wear behaviour of Fe-30Al-6Cr (at.%) iron aluminide alloy
dc.typeArtigo
fei.scopus.citations3
fei.scopus.eid2-s2.0-85152144508
fei.scopus.subjectAbrasive particles
fei.scopus.subjectAbrasive slurries
fei.scopus.subjectAbrasive wear behavior
fei.scopus.subjectGrooving abrasion
fei.scopus.subjectIron aluminide alloys
fei.scopus.subjectMicro-abrasive wear
fei.scopus.subjectMicro-abrasive wear mode transition
fei.scopus.subjectMode transitions
fei.scopus.subjectRolling abrasion
fei.scopus.subjectWear modes
fei.scopus.updated2024-08-01
fei.scopus.urlhttps://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=85152144508&origin=inward
Arquivos
Coleções
Artigos