Tribology and Crystallinity in pivot bearings of Ventricular Assist Devices

Página do item simplificado
dc.contributor.authorMARQUIORI, D. S.
dc.contributor.authorFLORENTINO, P. C.
dc.contributor.authorARAKI, S. Y.
dc.contributor.authorFUJITA, I. K.
dc.contributor.authorBASSO, R.
dc.contributor.authorBABETTO, A.
dc.contributor.authorMORO, J.
dc.contributor.authorBaltus Cornelius Bonse
dc.contributor.authorLEÃO, T. F.
dc.contributor.authorANDRADE, A. J. P.
dc.contributor.authorBOCK, E. G. P.
dc.contributor.authorOrcidhttps://orcid.org/0000-0002-2536-5183
dc.date.accessioned2021-10-26T16:39:59Z
dc.date.available2021-10-26T16:39:59Z
dc.date.issued2020-03-05
dc.description.abstractVentricular Assist Devices are blood pumps used in patients with Congestive Heart Failure who are waiting for a heart transplant. They aim to assist the ventricle to pump out blood in physiological circulation by increasing aortic pressure and decreasing intraventricular pressure. The IFSP Laboratory of Bioengineering and Biomaterials (BIOENG) has been developing an Implantable Centrifugal Blood Pump called CARoL for mechanical circulatory support. The objective of this dissertation is to evaluate the changes in the crystallinity of the polymeric Pivot Bearings supporting the impeller of this pump when subjected to friction generated by rotation of zirconia oxide ceramic shafts. The adopted methodology consisted of submitting new and used samples of: a) bearings set made of polyamide 6; and b) the set made of poly-ether-ether-ketone. Those new and used samples were characterized by X-ray diffraction tests and Infrared Spectroscopy. The diffractograms and spectra obtained were compared to evaluate the bearing crystallinity, for both polymers before and after friction. The tests carried out showed diffractograms and similar spectra for the new and used samples, thus, there are indications that the friction generated by the rotation of the shafts did not change the crystallinity of the polymeric bearings supporting the pump rotor.
dc.description.firstpage52
dc.description.issuenumber1
dc.description.lastpage62
dc.description.volume4
dc.identifier.citationMARQUIORI, D. S.; FLORENTINO, P. C.; ARAKI, S. Y.; FUJITA, I. K.; BASSO, R.; BABETTO, A.; MORO, J.; BONSE, B. C.; LEÃO, T. F.; ANDRADE, A. J. P.; BOCK, E. G. P. Tribology and crystallinity in pivot bearings of ventricular assist devices. The Academic Society Journal, v. 4, n. 1, p. 52-62, Marc. 2020.
dc.identifier.doi10.32640/tasj.2020.1.52
dc.identifier.issn2595-1521
dc.identifier.urihttps://repositorio.fei.edu.br/handle/FEI/3411
dc.relation.ispartofThe Academic Society Journal
dc.rightsAcesso Aberto
dc.subjectVAD
dc.subjectX-Ray Diffraction
dc.subjectinfrared spectroscopy
dc.subjectcrystallinity
dc.subjectCARoL Pump
dc.subjectpolymeric bearings
dc.titleTribology and Crystallinity in pivot bearings of Ventricular Assist Devicespt_BR
dc.typeArtigopt_BR
fei.source.urlhttps://www.theacademicsociety.net/tasjonline-v4-pg-52-62
Arquivos
Pacote Original
Agora exibindo 1 - 1 de 1
Imagem de Miniatura
Nome:
Bonse_pdf
Tamanho:
854.18 KB
Formato:
Adobe Portable Document Format
Baixar
Coleções
Artigos