Effect of hybrid manufacturing (am-machining) on the residual stress and pitting corrosion resistance of 316L stainless steel

Página do item simplificado
dc.contributor.authorEd Claudio Bordinassi
dc.contributor.authorMHURCHADHA, S. U.
dc.contributor.authorSERIACOPI, V.
dc.contributor.authorSergio Delijaicov
dc.contributor.authorLEBRÃO, S. M. G.
dc.contributor.authorTHOMAS, K.
dc.contributor.authorBATALHA, K.
dc.contributor.authorRAGHAVENDRA, R.
dc.contributor.authorOrcidhttps://orcid.org/0000-0001-5621-9536
dc.contributor.authorOrcidhttps://orcid.org/0000-0002-3915-3077
dc.date.accessioned2022-11-01T06:03:34Z
dc.date.available2022-11-01T06:03:34Z
dc.date.issued2022-10-05
dc.description.abstract© 2022, The Author(s), under exclusive licence to The Brazilian Society of Mechanical Sciences and Engineering.The use of additive manufacturing (AM) has grown exponentially in recent years and has many advantages, including feasibility, over other conventional processes in many current applications. The use of a second process, for example, machining, improves the surface finish and in this case, the use of two processes is known as hybrid manufacturing. Heat treatments are often performed on parts generated by the AM process, mainly to relieve the residual stresses generated, but for some materials, this can decrease the pitting corrosion resistance of the parts. The objective of this study is to analyze the effect of hybrid manufacturing (AM + machining) on residual stresses and pitting resistance corrosion, which can bring advantages to piece properties without the use of heat treatment. 316L stainless steel parts are generated by direct laser metal sintering (DLMS), with subsequent milling using a complete factorial planning for the design of the experiments. The cutting speed, feed rate, cutting depth, use of the cutting fluid and laser power in the DLMS process are all varied. Residual stresses are measured by X-ray diffraction and the blind hole method, with polarization curves raised by a potentiostat. The results show that it is possible to reduce the residual surface stresses in the parts, even for compressive stresses, and to improve the pitting corrosion resistance, when compared to the part without milling, depending on the cutting parameters used.
dc.description.issuenumber10
dc.description.volume44
dc.identifier.citationBORDINASSI, E. C.; MHURCHADHA, S. U.; SERIACOPI, V.; DELIJACOV, S.; LEBRÃO, S. M. G.; THOMAS, K.; BATALHA, K.; RAGHAVENDRA, R. Effect of hybrid manufacturing (am-machining) on the residual stress and pitting corrosion resistance of 316L stainless steel. Journal of the Brazilian Society of Mechanical Sciences and Engineering, v, 44, n. 10, oct. 2022.
dc.identifier.doi10.1007/s40430-022-03813-3
dc.identifier.issn1806-3691
dc.identifier.urihttps://repositorio.fei.edu.br/handle/FEI/4611
dc.relation.ispartofJournal of the Brazilian Society of Mechanical Sciences and Engineering
dc.rightsAcesso Restrito
dc.subject.otherlanguageAdditive manufacturing
dc.subject.otherlanguageHybrid machining
dc.subject.otherlanguagePitting resistance corrosion
dc.subject.otherlanguageResidual stress
dc.titleEffect of hybrid manufacturing (am-machining) on the residual stress and pitting corrosion resistance of 316L stainless steel
dc.typeArtigo
fei.scopus.citations3
fei.scopus.eid2-s2.0-85139088722
fei.scopus.subject'current
fei.scopus.subject316 L stainless steel
fei.scopus.subjectDirect laser metal sintering
fei.scopus.subjectHybrid machining
fei.scopus.subjectManufacturing IS
fei.scopus.subjectPitting corrosion resistance
fei.scopus.subjectPitting resistance
fei.scopus.subjectPitting resistance corrosion
fei.scopus.subjectStress corrosion resistance
fei.scopus.subjectSurface finishes
fei.scopus.updated2024-05-01
fei.scopus.urlhttps://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=85139088722&origin=inward
Arquivos
Coleções
Artigos