Processing of Metal Matrix AA2124 Aluminium Alloy Composites Reinforced By Alumina And Silicon Carbide By Powder Metallurgy Techniques

Página do item simplificado
dc.contributor.authorALVES, S. J. F.
dc.contributor.authorSOUSA, M. M. S.
dc.contributor.authorARAÚJO, E. R. DE
dc.contributor.authorAMBROZIO FILHO, F.
dc.contributor.authorSANTOS, M. J. DOS
dc.contributor.authorARAÚJO FILHO, O. O. DE A.
dc.date.accessioned2023-06-01T06:29:13Z
dc.date.available2023-06-01T06:29:13Z
dc.date.issued2014
dc.description.abstract© (2014) Trans Tech Publications, Switzerland.This work aims the processing of metal matrix AA2124 aluminium alloy composites reinforced by alumina (Al2O3) and silicon carbide (SiC). The composites were manufactured by powder metallurgy techniques, in a grinding using a ball mill spex type (high energy) at a ratio of balls/ powders of 10:1 and grinding time of 30 and 60 minutes using stearic acid (C18H36O2) as lubricant to each one of the samples. The fractions used in both reinforcements were 5, 10 and 15% in mass. The microstructural characterizations of AA2124 alloy powders with the reinforcements of alumina (Al2O3) and silicon carbide (SiC) powders were obtained by scanning electron microscopy (SEM) and the particles sizes and distribuition of the particle sizes in powders produced were obtained by laser diffraction, whereas the sintered characterizations were obtained by scanning electron microscopy (SEM) and mechanical characterization of the sintered tests was achieved by Vickers hardness (HV). The composites were uniaxially cold compacted (room temperature), at a pressure of 7.0 t/cm², thus forming small pellets that were sintered (at a temperature of 500 °C) in a vacuum furnace at IPEN (SP). There was observed the influence of the respective bulk fractions of reinforcement particles used in mechanical characteristics presented in the resulting composites.
dc.description.firstpage84
dc.description.lastpage89
dc.description.volume802
dc.identifier.citationALVES, S. J. F.; SOUSA, M. M. S.; ARAÚJO, E. R. DE; AMBROZIO FILHO, F.; SANTOS, M. J. DOS; ARAÚJO FILHO, O. O. DE A. Processing of metal matrix aa2124 aluminium alloy composites reinforced by alumina and silicon carbide by powder metallurgy techniques. Materials Science Forum, v. 802, p. 84-89, 2014.
dc.identifier.doi10.4028/www.scientific.net/MSF.802.84
dc.identifier.issn1662-9752
dc.identifier.urihttps://repositorio.fei.edu.br/handle/FEI/4840
dc.relation.ispartofMaterials Science Forum
dc.rightsAcesso Restrito
dc.subject.otherlanguageAA 2124 Alloy
dc.subject.otherlanguageAA2124 Aluminium alloy Metal Matrix Composites
dc.subject.otherlanguageHigh Energy Ball Milling
dc.subject.otherlanguagePowder Metallurgy
dc.titleProcessing of Metal Matrix AA2124 Aluminium Alloy Composites Reinforced By Alumina And Silicon Carbide By Powder Metallurgy Techniques
dc.typeArtigo de evento
fei.scopus.citations3
fei.scopus.eid2-s2.0-84922218569
fei.scopus.subjectHigh-energy ball milling
fei.scopus.subjectLaser diffractions
fei.scopus.subjectMechanical characteristics
fei.scopus.subjectMechanical characterizations
fei.scopus.subjectMicro-structural characterization
fei.scopus.subjectPowder metallurgy techniques
fei.scopus.subjectReinforcement particles
fei.scopus.subjectSilicon carbides (SiC)
fei.scopus.updated2024-05-01
fei.scopus.urlhttps://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=84922218569&origin=inward
Arquivos
Coleções
Artigos