The influence of turning parameters on surface integrity of nickel alloy 625

Página do item simplificado
dc.contributor.authorLoureiro D.
dc.contributor.authorDiniz A.E.
dc.contributor.authorFarina A.B.
dc.contributor.authorDelijaicov S.
dc.date.accessioned2019-08-20T00:13:10Z
dc.date.available2019-08-20T00:13:10Z
dc.date.issued2018
dc.description.abstract© IMechE 2016.Nickel-based alloys are used in industrial sectors where high mechanical strength and corrosion resistance are required at high temperatures. However, these alloys have low machinability as a consequence of inherent properties. Some of these properties such as high cold work hardening rate and low heat conductivity may cause damages to the machined surface. Among the nickel-based alloys, one that has good properties for oil exploration is alloy 625. As the components made of this alloy are frequently used in very rough environments, this study sought to evaluate the influence of tool geometry, cutting conditions (feed and cutting speed) and tool condition (fresh or worn) on the surface integrity of turned alloy 625 parts in order to discover turning practices for this alloy that result in minimal damage to the workpiece surface. A secondary aim was to evaluate how these input variables affected the life of the coated carbide tools used in the turning experiments with this alloy. The main conclusions are that (a) the surfaces produced with a fresh tool with positive geometry had compressive residual stresses, while those produced with negative tool geometry had tensile residual stresses and (b) when a worn tool was used all the surfaces produced had compressive residual stresses.
dc.description.firstpage1837
dc.description.issuenumber10
dc.description.lastpage1847
dc.description.volume232
dc.identifier.citationLOUREIRO, D.; Diniz; FARINA, A. B.; DELIJAICOV, Sergio. The influence of turning parameters on surface integrity of nickel alloy 625. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, p. 095440541668182, 2017.
dc.identifier.doi10.1177/0954405416681823
dc.identifier.issn2041-2975
dc.identifier.urihttps://repositorio.fei.edu.br/handle/FEI/1924
dc.relation.ispartofProceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture
dc.rightsAcesso Restrito
dc.subject.otherlanguagenickel-based alloy
dc.subject.otherlanguageresidual stress
dc.subject.otherlanguageSurface integrity
dc.subject.otherlanguagesurface roughness
dc.subject.otherlanguagetool geometry
dc.subject.otherlanguageturning process
dc.titleThe influence of turning parameters on surface integrity of nickel alloy 625
dc.typeArtigo
fei.scopus.citations7
fei.scopus.eid2-s2.0-85050296035
fei.scopus.subjectCoated carbide tools
fei.scopus.subjectCompressive residual stress
fei.scopus.subjectHigh mechanical strength
fei.scopus.subjectNickel based alloy
fei.scopus.subjectSurface integrity
fei.scopus.subjectTensile residual stress
fei.scopus.subjectTool geometry
fei.scopus.subjectTurning process
fei.scopus.updated2024-03-04
fei.scopus.urlhttps://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=85050296035&origin=inward
Arquivos
Coleções
Artigos