Investigation of residual stress in laser welding dissimilar materials Investigação da tensão residual na soldagem laser de mate riais dissimilares

Página do item simplificado
dc.contributor.authorMIRIM, D. DE C.
dc.contributor.authorBERRETTA, J. R.
dc.contributor.authorROSSI, W. DE
dc.contributor.authorLIMA, N. B. DE
dc.contributor.authorOLIVEIRA, R. R. DE
dc.contributor.authorSergio Delijaicov
dc.contributor.authorGOMES, D. O.
dc.contributor.authorOrcidhttps://orcid.org/0000-0001-5621-9536
dc.date.accessioned2023-08-26T23:49:42Z
dc.date.available2023-08-26T23:49:42Z
dc.date.issued2010-07-26
dc.description.abstractOne of the most critical problems found in the different materials welding is the residual stress formation, that happens mainly for the fact of those materials they possess coefficients of thermal expansion and different thermal conductivities. Like this in this work the residual tension was evaluated in the technique of welding laser among the steel low carbon, AISI 1010 and AISI 304. The materials were united for it welds autogenous of top with a laser of continuous Nd:YAG in that they were varied the potency, speed and the focus of the laser stayed constant in relation to surface of the sample. The main objective of the study went identification and to analysis of the residual stress in HAZ on both sides of seem. Um planning factorial of two factors at two levels each it was executed for optimization the combination of the factors potency and speed. The obtained answers were the residual stress in different depths in HAZ. In the surface of the sample measures of residual stress were accomplished by the technique of X-ray difraction. The hole drilling strain gage method it was applied to measure the residual stress on both sides of the union. The results were analyzed using the variance analysis and the statistical regression based on the different influences of the entrance and combination of the factors in the residual stress generated in that union. The results indicate that the development of models can foresee the answers satisfactorily.
dc.description.firstpage962
dc.description.lastpage971
dc.description.volume2
dc.identifier.citationMIRIM, D. DE C.; BERRETTA, J. R.; ROSSI, W. DE; LIMA, N. B. DE; OLIVEIRA, R. R. DE; DELIJAICOV, S.; GOMES, D. O. Investigation of residual stress in laser welding dissimilar materials Investigação da tensão residual na soldagem laser de mate riais dissimilares. 65th ABM International Congress, 18th IFHTSE Congress and 1st TMS/ABM International Materials Congress 2010, p. 962-971, jul. 2010.
dc.identifier.urihttps://repositorio.fei.edu.br/handle/FEI/4989
dc.relation.ispartof65th ABM International Congress, 18th IFHTSE Congress and 1st TMS/ABM International Materials Congress 2010
dc.rightsAcesso Restrito
dc.subject.otherlanguageLaser welding
dc.subject.otherlanguageResidual stress
dc.titleInvestigation of residual stress in laser welding dissimilar materials Investigação da tensão residual na soldagem laser de mate riais dissimilares
dc.typeArtigo de evento
fei.scopus.citations0
fei.scopus.eid2-s2.0-84893258570
fei.scopus.subjectCoefficients of thermal expansions
fei.scopus.subjectCritical problems
fei.scopus.subjectHole-drilling strain-gage method
fei.scopus.subjectLow carbon
fei.scopus.subjectResidual tensions
fei.scopus.subjectStatistical regression
fei.scopus.subjectStress formation
fei.scopus.subjectVariance analysis
fei.scopus.updated2024-11-01
fei.scopus.urlhttps://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=84893258570&origin=inward
Arquivos
Coleções
Artigo de evento