Engenharia de Materiais
URI permanente desta comunidadehttps://repositorio.fei.edu.br/handle/FEI/17
Navegar
2 resultados
Resultados da Pesquisa
- Influence of the microstructure on the degree of sensitization of a duplex stainless steel UNS S31803 aged at 650°C(2013) De Melo E.B.; Magnabosco R.; De Moura Neto C.This work evaluates the phase transformations during aging of an UNS S31803 DSS at 650°C and its influence on the DOS. The material was solution treated at 1175°C and then aged at 650°C for times up to 360 h. SEM-BSC images indicate the formation of Cr2N, σ and ÷ phases in the samples aged at 650°C. The analysis of DL-EPR curves, obtained in a 1 M H2SO4 + 0.25 M NaCl + 0.01 M KSCN solution, shows an increase in DOS values for samples aged at 650°C. Probably, this increase observed in DOS values is mainly related to the presence of Cr-and/or Mo-depleted á, as a result of σ phase, ÷ phase and/or Cr2N formation at 650°C. Moreover, a possible healing up of Cr-and/ or Mo-depleted areas is observed between 1 h and 4 h of aging at 650°C.
- Kinetics of sigma phase formation in a duplex stainless steel(2009) Magnabosco R.This work determines the kinetics of sigma phase formation in UNS S31803 Duplex Stainless Steel (DSS), describing the phase transformations that occur in isothermal aging between 700 and 900 °C for time periods up to 1032 hours, allowing the determination of the Time-Temperature-Precipitation (TTP) diagram for sigma phase and proposing a model to predict the kinetics of sigma phase formation using a Johnson-Mehl-Avrami (JMA) type expression. The higher kinetics of sigma phase formation occurs at 850 °C. However, isothermal aging between 700 and 900 °C for time periods up to 1032 hours are not sufficient to the establishment of thermodynamic equilibrium. Activation energy for both nucleation and growth of sigma phase is determined (185 kJ.mol-1) and its value is equivalent to the activation energy for Cr diffusion in ferrite, indicating that diffusion of Cr is probably the major thermally activated process involved in sigma phase formation. The determined JMA type expression presents good fit with experimental data between 700 and 850 °C.