Engenharia de Materiais
URI permanente desta comunidadehttps://repositorio.fei.edu.br/handle/FEI/17
Navegar
3 resultados
Resultados da Pesquisa
- Relation between pitting potential, degree of sensitization, and reversed austenite in a supermartensitic stainless steel(2017) Calderon-Hernandez J.W.; Hincapie-Ladino D.; Filho E.B.M.; Magnabosco R.; Alonso-Falleiros N.© 2017, NACE InternationalPitting potential (Ep) and degree of sensitization (DOS) of a supermartensitic stainless steel (SMSS) were determined on specimens heat-treated at different tempering temperatures (550°C, 575°C, 600°C, 625°C, 650°C, or 700°C). The effect of pH (pH 6 and pH 8) on the Ep obtained in a 3.5 wt% NaCl solution, as well as the correlation between Ep and DOS obtained in 0.5 M H2SO4 + 0.01 M KSCN solution, was studied. The results showed correlation between Ep and DOS values, the samples with the higher DOS values being the ones with the lower Ep. A mechanism was proposed that would explain the correlation of the presence of reversed austenite formed during tempering, Ep, and DOS.
- Effect of Niobium on Phase Transformations, Mechanical Properties and Corrosion of Supermartensitic Stainless Steel(2017) de Oliveira M.P.; Calderon-Hernandez J.W.; Magnabosco R.; Hincapie-Ladino D.; Alonso-Falleiros N.© 2017, ASM International.The influence of niobium addition in a supermartensitic stainless steel with 13Cr-5Ni-2Mo has been studied. The steel with Nb tempered at 600 °C for 2 h showed improved mechanical resistance properties and lower degree of sensitization, without compromising elongation and pitting corrosion resistance, when compared to the reference steel. In order to understand the Nb effect in such steel, mainly regarding phase transformation, different tempering time intervals have been studied. The better performance of the SM2MoNb is attributed to the hindering effect that Nb has in the kinetics of the phase transformations during tempering, delaying the precipitation start and coarsening stages of the present phases.
- Influence of the microstructure on the degree of sensitization of a duplex stainless steel UNS S31803 aged at 650°C(2013) De Melo E.B.; Magnabosco R.; De Moura Neto C.This work evaluates the phase transformations during aging of an UNS S31803 DSS at 650°C and its influence on the DOS. The material was solution treated at 1175°C and then aged at 650°C for times up to 360 h. SEM-BSC images indicate the formation of Cr2N, σ and ÷ phases in the samples aged at 650°C. The analysis of DL-EPR curves, obtained in a 1 M H2SO4 + 0.25 M NaCl + 0.01 M KSCN solution, shows an increase in DOS values for samples aged at 650°C. Probably, this increase observed in DOS values is mainly related to the presence of Cr-and/or Mo-depleted á, as a result of σ phase, ÷ phase and/or Cr2N formation at 650°C. Moreover, a possible healing up of Cr-and/ or Mo-depleted areas is observed between 1 h and 4 h of aging at 650°C.