Thermal performance and pressure drop in a ceramic heat exchanger evaluated using CFD simulations
Nenhuma Miniatura disponível
Citações na Scopus
1
Tipo de produção
Artigo de evento
Data
2011-07-07
Autores
MONTEIRO, D. B.
Paulo de Mello
Paulo de Mello
Orientador
Periódico
Proceedings of the 24th International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, ECOS 2011
Título da Revista
ISSN da Revista
Título de Volume
Citação
MONTEIRO, D. B.; MELLO, P. DE. Thermal performance and pressure drop in a ceramic heat exchanger evaluated using CFD simulations.
Proceedings of the 24th International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, ECOS 2011, p. 1311-1334.
Texto completo (DOI)
Palavras-chave
Resumo
There is one potential demand for heat exchangers capable of supporting high temperatures, typically higher than 800°C, for use in thermal power plants. These heat exchangers could be used in the implementation of EFGT (Externally Fired Gas Turbines) cycles. To support these working conditions the heat exchanger must be constructed with ceramics. This work presents the results obtained with CFD simulations of one plate-fin ceramic heat exchanger. Correlations for the Colburn and friction factors, for a range of Reynolds number between 500 and 1500, are evaluated from the numerical results obtained with CFD. These correlations may be used for the thermal design of ceramic heat exchangers. One validation procedure is conducted comparing the simulation results with experimental data for a compact heat exchanger of similar configuration.