ABS/HIPS blends obtained from WEEE: Influence of processing conditions and composition
Nenhuma Miniatura disponível
Citações na Scopus
19
Tipo de produção
Artigo
Data
2016
Autores
De Souza A.M.C.
Cucchiara M.G.
Ereio A.V.
Cucchiara M.G.
Ereio A.V.
Orientador
Periódico
Journal of Applied Polymer Science
Título da Revista
ISSN da Revista
Título de Volume
Citação
DE SOUZA, ADRIANA MARTINELLI CATELLI; CUCCHIARA, MAYARA GALLEGO; EREIO, ADRIANA VITÓRIO. ABS/HIPS blends obtained from WEEE: Influence of processing conditions and composition. Journal of Applied Polymer Science (Print), v. 133, p. 43831, 2016.
Texto completo (DOI)
Palavras-chave
Resumo
© 2016 Wiley Periodicals, Inc.The recycling of acrylonitrile-butadiene-styrene (ABS) and high-impact polystyrene (HIPS) from postconsumer electronic equipment housing was investigated. A preliminary study of shot size and particle size effects on the mechanical properties of ABS/HIPS (50/50) blends obtained directly via injection molding was conducted. Injection-molded specimens of ABS/HIPS blends, obtained at different compositions with or without previous extrusion, were subjected to mechanical, thermal, and morphological testing. Preliminary studies showed that a smaller particle size resulted in higher tensile and impact strength, regardless of the shot size used during injection molding. ABS/HIPS blends obtained using previous extrusion presented a slight increase in Young's modulus and a decrease in elongation at break and impact strength. The increase in glass-transition temperature related to the Polybutadiene (PB) phases of these blends indicated a possible increase in crosslinking structures during extrusion. In addition, these blends showed a coarse and heterogeneous morphology, suggesting that ABS did not completely mix with HIPS. Compared to processing conditions, the blend composition appeared to have a much stronger effect on the mechanical properties. The results obtained suggest the possibility of obtaining ABS/HIPS blends directly via injection molding as long as small ground particles are used.